The brazier, which is made on the basis of brickwork, is not only reliable, but also beautiful. Assembled in a summer cottage, such a barbecue will serve its owners for a long time.
Pick your recipe
You will need
Brick, cement, boards, sand, reinforcing mesh, roofing material, plastic film, stainless steel sheet, waterproof varnish, cast-iron grate.
Instruction manual
1
First, calculate the individual dimensions of the future design. The height of the fryer should match your height. As a rule, the height of the barbecue should be approximately at the level of the waist. It is important that you do not get burned, reaching out or, conversely, bending down strongly when cooking kebabs. The optimal length of the roasting pan is 1 meter. This is enough to place about 10 skewers on it. No longer needed, since you can not keep track of the barbecue in the cooking process. To maintain the optimum temperature, do not make the barbecue depth more than 1 brick.
2
Now choose a place to place the grill of brick. To protect it from water, place the brazier under the canopy. Many build it in the gazebo. It looks very beautiful. In addition, make sure that in the future the smell and soot from the barbecue does not penetrate into the living room.
3
Now proceed to the foundation. To do this, dig a pit 160 * 80 * 60 centimeters, fill it with a layer of sand 10-15 centimeters and make formwork from the boards. To provide the necessary strength, use a reinforcing mesh with cells of 15 * 15 centimeters, in two layers. Fill with cement, smooth the surface and leave the foundation for about a week. Then prepare a waterproofing for the grill, for this use a roofing material or a dense plastic film. After that proceed to the masonry of the walls. Use only heat-resistant brick and the same mixture for laying.
4
Do the brickwork as follows: put a row of 6 bricks in 2 rows at the corner, then make continuous rows of brickwork, as a rule, these are 3 rows. In the last 3 rows, lay a sheet of stainless steel, on which firewood will then be located. To ensure air draft between the wall and the plate, leave gaps.
5
Grind the brickwork and cover it with acrylic waterproof varnish, and lay the horizontal surface with tiles.
6
This is the easiest way to build a brazier of brick. If you wish, you can place a cast-iron grate on it and use it as an oven for cooking.